Computer not reading nvme or usb for boot sequence for windows 10 installation

Troubleshooting Boot Detection Issues During Windows 10 Installation on B560 Aorus Pro AX Motherboard

Installing Windows 10 on a new system can sometimes present challenges, especially when the motherboard fails to recognize boot devices such as NVMe drives or USB flash drives. If you are experiencing issues where your B560 Aorus Pro AX motherboard does not detect your NVMe SSD or USB installation media during the boot sequence, this guide aims to provide clear, professional troubleshooting steps to resolve the problem.

Understanding the Issue

In this scenario, the primary concern is that the motherboard’s boot process does not recognize the connected NVMe SSD or the USB flash drive used for installation. The presence of a LED indicator labeled ‘Boot’ suggests the motherboard provides visual cues about its boot status, which can be helpful in diagnosing the issue.

Common Causes

Several factors can contribute to boot detection problems:

BIOS/UEFI Settings Inadequacies
Incorrect Boot Priority Configuration
Secure Boot or Compatibility Mode Restrictions
Faulty or Improperly Created Bootable Media
Hardware Connection or Compatibility Issues

Step-by-Step Troubleshooting Guide

Access BIOS/UEFI Settings
Restart your computer and press the designated key (commonly ‘Delete’ or ‘F2’) during startup to enter the BIOS/UEFI firmware interface.
Ensure that your motherboard’s firmware is up to date. Check the manufacturer’s website for the latest BIOS updates and follow their update procedures carefully.
Verify Boot Mode and Compatibility
Confirm that your storage devices are compatible with the selected boot mode.
If installing Windows 10 from a USB, ensure the USB drive is formatted correctly (preferably FAT32 for UEFI boot).
For NVMe drives, ensure that the hardware is properly seated, and the drive is recognized in BIOS.
Configure Boot Priority Settings
Navigate to the ‘Boot’ tab in BIOS.
Set your USB drive or NVMe SSD as the primary boot device.
Disable ‘Fast Boot’ temporarily, as it can sometimes prevent detection of boot media.
Enable or disable ‘Secure Boot’ depending on your installation media. Usually, disabling Secure Boot helps with booting from non-certified media.
Enable Necessary Storage and Boot Modes
Ensure that the ‘CSM’ (Compatibility Support Module) is enabled if your BIOS version requires it. Alternatively, set the BIOS to UEFI mode only if your media supports UEFI boot.
Check