Save my family pc tech guys(if possible, just maybe)

How to Troubleshoot and Recover Data from a Non-Booting Family PC

Encountering technical issues with a family computer can be quite stressful, especially when important files are at stake. If you’re facing a scenario where your PC refuses to boot, and you’ve already tried various solutions without success, this guide aims to provide steps to troubleshoot the problem and potentially recover your valuable data.

Understanding the Situation

In this case, the computer encountered problems after attempting to adjust BIOS settings, specifically lowering DRAM frequencies. The system now fails to load Windows, and BIOS beeps indicate a hardware or configuration issue. The user is concerned about their files, including family photos, and seeks advice on recovery.

Initial Troubleshooting Steps

Assess the BIOS Beep Codes:
Refer to your motherboard’s manual or manufacturer website to interpret the beep patterns.
Beeps often correspond to specific hardware issues, such as memory errors or motherboard problems.
Reset BIOS Settings:
Turn off the PC and disconnect power.
Locate the CMOS jumper on the motherboard or remove the CMOS battery.
Wait for a few minutes before reinserting the battery or repositioning the jumper.
This resets BIOS to default settings, which may resolve boot issues caused by incorrect configurations.
Check Hardware Components:
Reseat RAM modules and ensure they are properly installed.
Test with known working RAM if available.
Verify that all hardware components, including storage drives, are properly connected.
Attempt to Boot into Safe Mode or Use Recovery Media:
Use a Windows installation USB or recovery drive:
- Boot from the USB media
- Select “Repair your computer”
- Try to repair startup issues or access command prompt for further diagnosis

Data Recovery Options

If the system still does not boot, your primary goal should be data retrieval before attempting major repairs that could risk data loss:

Remove the Storage Drive:
Carefully disconnect the drive from the affected PC.
Connect it to another working computer via a SATA-to-USB adapter or directly install it internally.
Access the drive and copy important files, such as family photos.
Use Data Recovery Software:
If the drive is recognized but files are inaccessible, employ data recovery tools like Recuva, EaseUS Data Recovery Wizard, or Disk Drill.
Seek Professional Help:
If hardware issues are confirmed