Troubleshooting the HP EliteBook 850 G6: Dealing with Power and Boot Loop Issues

If you’re facing frustrating boot loop problems with your HP EliteBook 850 G6, you’re not alone. Many users have encountered similar issues, particularly with the caps lock light flashing in a solid pattern, indicating a deeper problem at play. Here’s a comprehensive account of my experience diagnosing and addressing this persistent issue, which may help you navigate your own challenges.

Diagnosing the Problem

Initially, my HP EliteBook 850 G6 was showing signs of a corrupted Intel Management Engine, which hindered its ability to boot properly. After conducting a series of troubleshooting steps, including reseating the RAM, resetting the System Management Controller (SMC), and attempting a BIOS reinstallation, I finally managed to coax it into posting. Although I can’t recall which specific action resolved the issue, I was relieved when the Intel Management Engine corruption notification appeared, indicating that an update was available.

What Happened Next

Following the successful update of the Intel Management Engine, I proceeded to install Windows. The installation process was smooth, and I left the laptop to perform necessary updates. However, upon returning to the room, I was dismayed to find the same boot loop error reoccurring. Strangely, this issue is not isolated; another HP EliteBook 850 G6 I own has exhibited the same exact symptoms.

Next Steps and Speculations

Given the recurring nature of the problem, I suspect that a BIOS reflash may be necessary to resolve the persistent boot loop anomaly. While I’ve conducted a few fixes, I’m starting to lean towards the idea that the underlying cause may not be hardware-related, but rather something that can be remedied through software adjustments.

If you’re experiencing similar problems, it may be worth attempting a BIOS reflash or consulting online resources for specific instructions tailored to the HP EliteBook 850 G6. As I continue to delve into this issue, I hope to find a definitive solution that not only resolves the problem for myself but also assists others in the community facing the same challenge.

Stay tuned for further updates on this journey—together, we can tackle these technical hurdles and keep our devices running smoothly!

Share this content:

One Comment

  1. Hi there,

    Based on your detailed description of the HP EliteBook 850 G6 boot looping issue with the solid caps lock light, it sounds like you’re encountering a hardware or firmware fault that’s preventing proper startup. A common cause in such cases is a corrupted BIOS or firmware, especially since you’ve already tried reseating RAM and resetting system components.

    Here are some steps you might consider to further troubleshoot and potentially resolve the problem:

    • Perform a BIOS Reflash: Since you mentioned the possibility, re-flashing or updating the BIOS with the latest firmware from HP’s official support site can often fix boot loop issues caused by firmware corruption. Ensure to follow HP’s official instructions carefully to avoid bricking the device.
    • Use HP’s Built-in BIOS Recovery: Many HP laptops have a BIOS recovery feature. You can attempt to access it by powering off the device, then pressing the Windows + B keys while powering on to initiate BIOS recovery mode. Follow on-screen instructions if available.
    • Reset Hardware Components: Disconnect all peripherals, disconnect AC power, and then hold the power button for 15-20 seconds to drain residual power. Try booting with minimal hardware connected.
    • Check for Hardware Failures: If possible, perform hardware diagnostics using HP’s built-in

Leave a Reply

Your email address will not be published. Required fields are marked *