Aspire 5 laptop stuck on 0% and suddenly shuts down

Troubleshooting a Lenovo Aspire 5 Laptop Stuck on 0% Battery and Unexpected Shutdowns

If you own a Lenovo Aspire 5 laptop and are experiencing issues where your device gets stuck at 0% battery and unexpectedly shuts down, you’re not alone. Such problems can be frustrating, especially when they occur unexpectedly and interfere with your daily tasks. In this article, we’ll explore common causes for these issues and provide professional troubleshooting steps to help you resolve them effectively.

Understanding the Issue

Several factors can cause an Aspire 5 laptop to remain stuck at 0% battery and shut down suddenly, including:

Faulty or aging battery
Charging port or charger problems
Software glitches or corrupted system files
Power management settings issues
Hardware malfunctions

The Situation Described

In this case, the user reports that the laptop was used during gaming without recent charging. When the battery reached 0%, the laptop shut down abruptly. Upon reconnecting the charger, the device remained stuck on 0% for an extended period, despite waiting 20 minutes. Attempts to open applications led to a sudden shutdown. Furthermore, the system entered “Preparing Automatic Repair” mode, with issues in booting from recovery options such as F11 or F12.

Professional Troubleshooting Steps

Check the Charger and Power Connection
Verify that your charger is functioning correctly by testing it with another compatible device or using a different, known-good charger.
Inspect the charging port for debris or damage.
Ensure the power outlet is operational.
Perform a Hard Reset
Disconnect the charger and remove the battery if possible.
Press and hold the power button for 15-20 seconds to discharge residual power.
Reconnect the charger (without the battery if removable), then attempt to turn on the laptop.
Calibrate the Battery
Allow the laptop to discharge until it powers off.
Plug in the charger and let it charge to 100% without turning it on.
Turn on the device to see if the battery percentage updates correctly.
Check for Battery and Hardware Health
Use built-in diagnostics (if available) or third-party tools to assess battery health.
Consider replacing the battery if it shows sign of deterioration.
Run hardware diagnostics to check for other issues.
Boot into Advanced Recovery Options
If the system enters “Preparing Automatic Repair,” let it proceed. If it gets stuck:

–