A Comprehensive Guide to Installing a Wi-Fi Adapter in Your HP EliteDesk 800 G4

If you’re looking to enhance your HP EliteDesk 800 G4’s connectivity with a Wi-Fi adapter, you’re in the right place. Upgrading to the Intel AX210 can provide you with faster wireless speeds and improved performance. However, understanding the installation process is key to a successful upgrade. In this blog post, we’ll walk you through the steps to effectively install your new Wi-Fi adapter.

Step 1: Gather Your Tools and Equipment

Before you start, make sure you have the necessary tools on hand. You’ll need:

• A Phillips-head screwdriver
• The Intel AX210 Wi-Fi adapter
• An anti-static wrist strap (optional, but recommended)

Step 2: Preparing Your Computer

1. Shut Down Your PC: Make sure your EliteDesk is completely powered off and unplugged from the wall.
2. Remove Peripherals: Detach any connected peripherals, including your monitor, keyboard, and mouse.

Step 3: Open the Case

1. Lay the Computer Flat: Place the EliteDesk on a flat surface with the top facing up.
2. Unscrew the Cover: Locate the screws on the back or sides of the case and carefully remove them with your screwdriver.
3. Slide Off the Panel: Gently slide the side panel off to reveal the internal components of your PC.

Step 4: Locate the M.2 Slot

With the case open, you’ll need to find the M.2 slot designated for wireless adapters. The Intel AX210 requires a compatible M.2 2230 (or smaller) slot.

1. Check Your Motherboard: Look for the M.2 slot which is typically a small connector situated near the CPU or motherboard edge.
2. Refer to the Manual: If you’re having difficulty locating it, refer to your HP EliteDesk manual for specifics on your model’s layout.

Step 5: Installing the Intel AX210

1. Insert the Adapter: Carefully align the notches of the Intel AX210 with the corresponding grooves in the M.2 slot. Insert the adapter at a 30-degree angle.
2. Secure the Adapter: Once fully inserted, press down gently until it clicks into place. Use the screw that came with the adapter or find an appropriate one from your PC’s