My computer has no display and turns on to “off” immediately. It makes a small whirring sound when shut off. Ive already taken it to a repair shop and they said leave it be for a day or two. Ive left it alone for 3 and i need it for work. Any ideas?

BCAdmin1 Comment on My computer has no display and turns on to “off” immediately. It makes a small whirring sound when shut off. Ive already taken it to a repair shop and they said leave it be for a day or two. Ive left it alone for 3 and i need it for work. Any ideas?

Troubleshooting a Computer with No Display: Seeking Solutions

Have you ever experienced the frustration of a computer that powers on but displays nothing? This is a common issue that can leave users puzzled and anxious, especially when it interrupts work commitments. Recently, I encountered a similar problem: my computer boots up but quickly shuts down with just a faint whirring sound after it turns off.

After taking it to a repair shop for assistance, the technician suggested that I leave it untouched for a day or two. However, I followed this advice and waited patiently for three days, only to find myself in the same predicament. With deadlines looming and work dependent on my device, I’m now in search of potential solutions or experienced advice from fellow users.

If you’ve faced a similar scenario, I would greatly appreciate any insights or troubleshooting tips you could share. Are there specific components I should inspect, or techniques that might help diagnose the issue further? Your expertise could make a significant difference as I navigate this challenge. Thank you for your assistance!

Share this content:

Related Posts

One Comment

  1. Relevant Troubleshooting Steps for a Non-Display Issue

    Based on your description, it sounds like your computer might be experiencing hardware-related issues that prevent it from powering on properly or displaying output. Here are some steps you can try to diagnose and potentially resolve the problem:

    • Check Power Supply and Connections: Ensure that your power cable and any associated adapters are securely connected. If possible, try using a different power outlet or power cable to rule out power issues.
    • Perform a Hard Reset: Disconnect all external devices and unplug the power cord. If you’re comfortable opening your device, perform a hard reset by removing the battery (if removable), holding the power button for 15-30 seconds, then reconnecting everything and trying to power on again.
    • Inspect for Hardware Failures: The whirring sound could indicate a fan or hard drive issue. Listen closely to identify the source of the noise. If you can, open the case and check for dust buildup, loose cables, or visible damage.
    • Test with Minimal Hardware: Remove any hardware components you can (additional RAM modules, external drives) and attempt to boot with minimal setup. This can help identify faulty hardware.
    • External Display Test: If you have an external monitor
    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *