PC connected to WiFi with no Internet “No Internet, Secured.”

Troubleshooting Guide: Resolving “No Internet, Secured” on a Windows 11 PC Connected to WiFi

Encountering a “No Internet, Secured” message on your Windows 11 PC can be frustrating, especially when other devices on your network connect without issue. If your PC displays this notification despite your WiFi being robust and other devices functioning normally, you’re not alone. This article provides a comprehensive overview of potential causes and effective solutions to resolve this common connectivity problem.

Understanding the Issue

When your Windows 11 device shows “No Internet, Secured,” it indicates that your PC is connected to the WiFi network but cannot access the internet. Common signs include:
– Internet access is unavailable despite being connected
– The network status shows as “Unidentified Network”
– Other devices on the same network work correctly

Based on reports from users with similar experiences, this issue may not be related to hardware faults or the strength of your WiFi signal but rather configuration or system settings.

Key Details from Your Setup

  • Device: Acer gaming PC
  • Operating System: Windows 11
  • Processor: 2.5 GHz
  • Memory: 16 GB RAM
  • Network: EE Broadband, with other devices functioning correctly
  • Observed Issue: The network connection shows as “Unidentified Network” in Windows network connections, and no traditional solutions have worked.

Common Causes and Solutions

1. Restart Your Network Equipment and PC

Begin with the simplest step:
– Power off your modem/router, wait for about 60 seconds, then turn it back on.
– Restart your PC.
This can often resolve temporary network conflicts.

2. Forget and Reconnect to the WiFi Network

  • Go to Settings > Network & Internet > Wi-Fi.
  • Select your network and click Forget.
  • Reconnect by selecting the network, entering the password, and seeing if the connection stabilizes.

3. Disable IPv6 Protocol (Per Online Recommendations)

Some users report success by disabling IPv6, as it can sometimes cause connectivity issues:
– Open Control Panel > Network and Internet > Network and Sharing Center.
– Click on Change adapter settings.
– Right-click your WiFi connection and select Properties.
– Scroll to Internet Protocol Version 6 (TCP/IPv6), uncheck it, and click OK.
– Restart your PC and test

Share this content:

Leave a Reply

Your email address will not be published. Required fields are marked *