A couple of issues, most likely one cause

BCAdmin1 Comment on A couple of issues, most likely one cause

Troubleshooting an Acer Aspire M: A Deep Dive into Issues and Solutions

When powering up an older computer, it can be concerning when certain components fail to function as expected. This is a situation many users face, and I recently encountered a few perplexing issues with my 2014 Acer Aspire M. Though it’s still a solid machine, the problems I’m experiencing have led me to seek advice from the community.

Here’s what happens: when I boot up my computer, it does power on, but the display fails to show anything, and the fan doesn’t engage either. Compounding this, the CPU has become noticeably hot during operation, prompting me to consider reapplying thermal paste, especially given the age of the components.

Given these symptoms, I suspect that a single underlying problem could be causing all these issues. I’m reaching out to see if anyone has encountered similar challenges or has insights into potential solutions.

I appreciate any suggestions or tips you might have that could help me resolve these issues. Thank you in advance for your guidance!

Share this content:

Related Posts

One Comment

  1. Hi there,

    It sounds like you’re experiencing symptoms that could be indicative of a few potential hardware issues. Given that your Acer Aspire M is from 2014, aging components and dust accumulation might also be contributing factors. Here are some troubleshooting steps you can follow:

    • Check the Power Supply: Ensure that your power adapter and cable are functioning correctly. Try testing with a different power outlet or adapter if available.
    • Inspect Internal Connections: Open the case carefully and verify that all internal cables, especially the display connector, are securely connected. Re-seat RAM modules as well.
    • Test the Display: Connect an external monitor to see if any display output is visible. This helps determine if the issue is with the screen or the GPU.
    • Reset BIOS/CMOS: Try resetting the BIOS by removing the CMOS battery for a few minutes and then reinserting it. This can sometimes resolve hardware initialization issues.
    • Thermal Management: If the CPU is heating excessively, reapplying thermal paste is a good idea. Ensure that the heatsink is clean and properly seated.
    • Check for Beep Codes or Indicator Lights: Listen
    Reply

Leave a Reply to [email protected] Cancel reply

Your email address will not be published. Required fields are marked *